XTOOL InPlus IP508 OBD2 Scanner Diagnostic Tool with 6 Services ABS Bleeding Oil Reset EPB SAS BMS Throttle Free Updates

The IP508 is aimed at the servicing side rather than deep diagnostics. It reads four major systems in detail and carries six maintenance routines: oil reset, EPB reset, ABS bleeding, throttle relearn, BMS reset and SAS.

Specifications

• 6 Maintenance Services: Oil Reset, EPB Reset, ABS Bleeding, Throttle Relearn, BMS Reset, SAS Reset
• 4 Major System Diagnostics: Same as XTOOL InPlus IP508S, IP508 code reader perform in-depth diagnosis of the 4 main systems in a car's computer (Engine, Transmission, Airbag, and ABS) for over 90+ vehicle brands.
• Check Freeze Frame: Record various related parameters the moment a DTC is recorded in the ECU.
• Retrieve ECU Information: Check the module info, software version and etc.
• AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.
• Multi-Language supports: English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, Korean. Please offer your tool S/N if you need to change the menu language.
• Note: AutoVIN can't work on All Vehicles. Please try manually Input if AutoVIN failed or come to us for check with your VINs.
• Read/Erase Fault Co*des: Read and clear check engine light codes including generic, manufacturer-specific, and pending codes to clears the codes and turns off the warning light.
• Live Data Stream: Displays live data stream in digits/text, allows you to compare live readings to find out suspicious parameters.
• Freeze Frame: Shows vehicle parameters recorded by ECU when an emission-related fault occurs.
• O2 Sensor Test: Allows you to retrieve and view the O2 sensor monitor test result for the last test performed from the vehicle's on-board computer.
• View Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
• NOTE: To check misfire counters, monitor readiness status, o2 sensor status, please go to Diagnosis- OBDII- On_Board Monitor Tests/I/M Readiness Status/O2 Monitor Test.
• ABS Bleeding: Cycle the ABS pump to bleed the air out of the ABS to restore the braking sensitivity.
• Oil Reset: Reset the service and zero oil light once changed the oil.
• Throttle Relearn: After clearing or repairing the electronic throttle, re-learning and adapt throttle sensor position.
• EPB Reset: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired or replaced.
• BMS Reset: Reset the monitoring unit of the car battery after replacement.
• SAS Calibration: Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.
• ✔ NOTE: All the Service functions available vary across vehicles. We recommend come to us with car VIN# to check compatibility before purchase!
• ✔ Live Data Record/Playback: Record and playback the live data stream later to better troubleshoot/compare and analysis to address the faults.

Also stated by the supplier

• XTOOL IP508 is an automotive smart diagnostic system designed for DIYers, mechanics, electricians, and car maintenance shops. It supports ECU information, read & clear DTC, live data, and freezes frame for 5 major systems, including the engine, transmission, EPB, ABS, and SRS. Some common special functions, such as Throttle matching, ABS Bleeding, Maintenance light Reset, EPB Reset, SAS Matching, and BMS Reset are supported. It covers 98% of vehicles on market, works on more than 85 brands, and 10000 cars.
• XTOOL InPlus IP508 OBD2 Scanner Diagnostic Tool with 6 Services
• Free Update Lifetime for All Functions: Permanent update service for life, no worries about other uncertain cost.
• Built in DTC Library: This OBD2 scanner also gives you the details definitions of fault codes in the Diagnostic Trouble C0de (DTC) lookup library. You can simply select the code to read its definition and see potential ways to solve your car problems, save your time for searching online.
• Live Data Graphing & Date Record & Playback: View Various Sensors' PIDs, like O2 sensor data, Misfire Data, Long/Short Term Fuel Trim, Mass Air Flow, Intake Air Temp, Fuel Rail Pressure, Engine RPM, Idle Speed, Coolant Temp, Transmission Oil Temperature, ABS Wheel Speed, and etc.
• Full OBD2 Functionality To Turn Off Check Engine Light
• IP508 check engine code reader will also help giving you the confidence to better understand your car and learn how to perform common diagnosis and repair by yourself. Also avoid car repair scams and sky-high repair cost even when you need to sent your car to the repair shop.
• IP508 OBD2 Code Reader Scanner for All OBD II Protocols Cars Since 1996
• On-board Monitor Test(Mode 06): Retrieves and displays test results for emission-related components and systems. Track on how emission control components and sensors are functioning(e.g. Misfire Monitoring, Exhaust Gas Sensor Monitor, Fuel System Monitor).
• I/M Readiness Check: InPlus IP508 car diagnostic scanner tool comes with I/M Readiness function to check the operations of the vehicle-specific number of monitors like misfire monitor, fuel system monitor, comprehensive components monitor, Oxygen sensor monitor and etc, helping your vehicle ready to pass the annual smog check.
• Component Test(Mode 08): Use IP508 scan tool to plug into the vehicle's computer and determines that the emission system and components are working properly. The test downloads stored information from the vehicle's computer to identify emission systems or components that are not working properly.
• DTC Lookup Library: IP508 scanner for car can lookup the complaint fault co~de's definition directly, including the fault description, the cause of the fault, maintenance suggestions and background knowledge, saves your searching time and help you better understand the fault co*de definition.
• XTOOL InPlus IP508 6 Most Commonly Useful Maintenence Services
• Powerful Live Data Streams Help you More Confident To Address The Faults
• ✔ Customize Specific PID on 4 Main Systems: XTOOL InPlus IP508 OBD2 Scan Tool display live data stream in text or graphs like cylinder misfires data, transmission fluid/Oil temperature, fuel trim, ATF temperature, cylinder balance rates, engine rpm, O2 sensors, mass air flow sensor data, fuel pressure, actual fuel temperature vs desired fuel temperature and etc;
• ✔ 8-IN-1 Live Data Graphing: Allow you to select specific PIDs, and merge graphs for up to 8 data PIDs combined at one time in one graph. A line graph will allow you to see what happened at what time and in relation to what else you're interested in, such as fuel pressure, battery voltage, cylinder misfire data, long/short fuel trim, engine rpm, etc.
• ✔ Graph up to 8 sensors individually in one view.
• ✔ Export Live Data as CSV File: Export Live Data records as CSV files and store them for analyzing the vehicle performance over time.

It records freeze frame data at the moment a code is stored, retrieves module and software version information, and reads and clears generic and manufacturer codes with live VIN does not work on every vehicle, so expect to enter details manually sometimes. Updates are free.

Orders leave the warehouse within one business day. Delivery then takes 7 to 20 days. Orders over $150 ship free.

Not right for you? You have 30 days from delivery, with no restocking fee. See the full returns policy.