TopDiag P180 for 9-30 Volts Vehicle Electrical System Daignostics Injectors Test Support Cars, Pickups, SUVs, Motorcycles, Excavators, Steamships,

The TopDiag P180, an electrical system diagnostic tester for 9 to 30 volt vehicles with injector testing. It suits cars, pickups, SUVs, motorcycles, excavators and steamships, measures AC voltage from minus 100 to plus 100 VAC and frequency from 1 Hz to 1 MHz, and reads on a 160 by 128 DPI TFT colour display.

Specifications

• AC Voltage Measurement: -100 VAC to +100 VAC
• Display: TFT color display, 160 x 128 DPI
• Frequency: 1 Hz to 1 MHz

What you get

• 1pc x circuit tester
• 1pc x wire finder
• 1pc x cigarette lighter cable
• 1pc x probe
• 1pc x clip cable to connect battery
• 1pc x extension cable
• 1pc x user manual
• The TopDiag P180 is designed for vehicle electrical systems within the range of 9 to 30 volts. It is a diagnostic tool aimed at making auto repair easier, faster, and more efficient. It supports detection of all 12-24V vehicles electrical systems, such as cars, pickups, SUVs, motorcycles, excavators, steamships, etc. The TopDiag P180 is suitable for a wide range of vehicles and provides comprehensive diagnostic capabilities for efficient troubleshooting and repair.
• TopDiag P180 for 9-30 Volts Vehicle Electrical System Daignostics Injectors Test Support Cars, Pickups, SUVs, Motorcycles, Excavators, Steamships
• TopDiag P180 comes with a one-year warranty.
• The position of the open conductor can be quickly detected. Plug the tip of the probe into an open wire, send a sonic signal to the wire, and use the P181 wire finder to follow the wire from the tip of the probe to find the location of the breakpoint.
• This mode is used to measure AC voltages and can be used for any AC voltage or pulse waveform signal where RMS average voltage measurements are required.
• AC peak-to-peak for any AC voltage signal requiring peak-to-peak voltage measurement.
• AC Frequency
• The frequency counter mode is used to measure the frequency or pulse width of AC voltage signals for testing, e.g. MAF sensors, wheel sensors etc.
• Voltage Testing
• Ultra-wide voltage range to meet various testing needs. Supports 0-200 VDC voltage measurement and -100 VAC ~ +100 VAC voltage measurement.
• Battery Diagnostics
• AC Voltage Measurement
• DC Voltage Detection
• Power Supply: 9-30V DC power systemResistance: 0.1 Ω to 1 MΩWorking Temperature: 0°C to 60°C (32°F to 140°F)Trip Current: 8 AMPS for 1 hour/12 AMPS for less than 1 hour/16 AMPS for less than 5 secondsStorage Temperature: -40°C to 70°C (-40°F to 158°F)DC Voltage Measurement: 0V to 200V

Excavators and boats on the same tool as cars is unusual, and it is what the 9 to 30V range buys.

Orders leave the warehouse within one business day. Delivery then takes 7 to 20 days. Orders over $150 ship free.

Not right for you? You have 30 days from delivery, with no restocking fee. See the full returns policy.