Original Launch Creader 3001 OBDII / EOBD Code Scanner Support Languages Same as AL419

The CR3001 is the simplest tool in the Launch range and it is honest about that: it reads and clears OBD2 codes on 1996 and later vehicles and does not need upgrading, because the software does not change.

Specifications

• Multi-Language: English, French, Russian, Spanish,German, Italian,Portuguese
• Question 1: Does it tell you more than just the code? Also does it work on 90's cars?
• Answer 1: 96 and up vehicles have obd2 so if you vehicle is 96 or up yes if it's a 95 down to 80 something it's obd1 which this tool can read it just doesn't come with the cable to read obd1 so you'll have to order it separately
• Question 2: Can Launch Creader 3001 software update?
• Answer 2: Hello, this scanner do not need to upgradeable.
• Question 3: Can Launch Creader support Benz C230K 2005?
• Answer 3: It can not work for 2005 c230K, but launch creader 3001 can work for 2006-2016 benz cars.
• Question 4: Will it work for honda accord 2009 lxp
• Answer 4: Hello, yes,it can work for honda accord 2009.
• Question 5: Is this compatible with my 2007 toyota avanza in the philippines?
• Answer 5: Hello, I am sorry, I can not sure, I do not know if your car is JOBD car or OBD2 car, 3001 can not support jobd car, it support obd2 protocol car.
• Screen: 1.77 " TFT, 160*128dpi
• Voltage Range: 9-18V
• Operating Temperature: 0ºC -50 ºC (32 ºF -122 ºF )
• Environment Temperature: -20 ºC -70 ºC (-4 ºF -158 ºF )
• Dimension: 118mm*68mm*22.3mm(4.65" *2.68 " *0.88 " )

Also stated by the supplier

• LAUNCH Creader 3001 CR3001 is Car OBD2 Code Reader Support Full OBDII/EOBD,it can work better than launch Launch creader 4001
• Launch Creader 3001 OBDII / EOBD Code Reader Scanner Support Multilanguages Same as Al419
• As everybody who has cars knows, people always spend hundreds of even thousands of dollars on their vehicles just because the engine light was on. The easiest way to reset the check engine light and clear any codes is to use a scan tool, which plugs into the OBD2 DLC port, usually somewhere on the driver's side. Check your owner's manual for the DIYers, you don't need to invest in a top-of-the-line scan tool for basic diagnostic functions, our Launch Creader 3001 make DIYer and car enthusiatist repair their vehicle's problem by themselves.
• Top 6 Reasons to Get Launch Creader 3001:
• Wide Compatibility
• Powerful Scan Tool
• 100% Risk Free Purche
• O2 Sensor
• Creader 3001 supports 10 modes of OBDII diagnostic:
• Mode $01 Request current powertrain diagnostic data.
• Mode $02, Request freeze frame information.
• Mode $03, Request emissions-related diagnostic troublecodes.
• Mode $04, Clear/reset emissions-related diagnosticinformation.
• Mode $05, Request oxygen sensor monitoring test results.
• Mode $06, Request on-board monitoring test results for specific monitored systems.
• Mode $07, Request emission-related diagnostic troublecodes detected during current or last completed drivingcycle
• Mode $08, Request control of on-board system, test orcomponent.
• Mode $09, Request vehicle information.
• Mode $0A, Request emissions-related diagnostic troublecodes with permanent status after a clear/reset emission-related diagnostic information service.
• Launch Creader 3001 Support Vehicle Models:
• J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898).
• They are all obd2 scanner,check engine light, read and clear codes, view freeze frame data, I/M readiness status test, reads live datastream, read vehicle information, misfire test. BUT Compare with al319, launch 3001 can do O2 Sensor test, Evap system test, On-Board monitor test.
• How to Verify Whether the Vehicle Will Pass the Emission Test With 3001 Creader?
• After entering the I/M Readiness,there will be 10 results on the list. Misfire monitor,fuel system,component monitor,catalyst monitor,heated catalyst,EVAP system,secondary aire sys,O2 sensor,O2 sensor heater EGR and/or WT.There will be an OK if each of them works fine.(Not all vehicles have these 10 parts)
• Different Between Launch 3001 scanner and Autel AL319?
• Review 1:This Scan Tool is a good one, You can read and erase codes easily. I just used on a 2008 Civic and I was able to read code that in this case was a faulty oxygen sensor and after repair I was able to erase code. All good.now.
• Review 2:Simple, cheap, and it works! Gave great live streaming info. Too bad I don't know much of the data or have use for it at this time. But this would be really useful in the future. I mainly bought this to remove an code error. Although keep in mind, it you do not replace/repair the fault itself, the error will come back.
• Review 3:I used this to check the A/F and O2 sensors on my truck to determine if the sensors were bad or if I really needed to replace my catalytic converter. The I/M readiness information is useful when you are preparing for a smog inspection.
• Review 4:I used it on 2006 BMW 325i and 98 Toyota Sienna. work great on both cars. Reading code is a lot faster than my 5 years old OBD scanner. The display is a little small and a bit hard to read the text, otherwise, it is a good scanner. The oxygen sensor test looks cool but I haven't gotten a chance to try it yet.
• Review 5:I was using an OBD2 scanner that linked to my smartphone but unless I wanted to pay much money for an app that gave me more than the elementary functions it did not do enough. This Creader has many features and easy to use. No need for batteries as it runs off your car's voltage. The screen is bright and very easy to read plus it has lots of features that my old one did not have unless you paid for a better app.

Languages are English, French, Russian, Spanish, German, Italian and Portuguese. The supplier answers coverage questions directly: it works on a 2009 Honda Accord but not a 2005 Mercedes C230K. If a car is 1996 or later and OBD2 compliant, it will talk to it.

Orders leave the warehouse within one business day. Delivery then takes 7 to 20 days. Orders over $150 ship free.

Not right for you? You have 30 days from delivery, with no restocking fee. See the full returns policy.