[Global Version] 2026 Launch X431 PAD V Elite J2534 Tool With New Smartlink C Support ECU/ECM Online Program Topology Map CANFD/DoIP and 60+ Services

The Launch X431 PAD V Elite J2534 tool in global version with the new SmartLink C, supporting ECU and ECM online programming, topology mapping, CANFD and DoIP and more than 60 service functions. It runs Android 10 on an eight core 2.0GHz processor, connects by Wi-Fi, USB or Bluetooth on dual band 2.4 and 5GHz, and covers EV high voltage system and battery pack diagnostics.

Specifications

• Operating System: Android 10.0 operating system and 8-core Processor, 2.OGHz CPU can work more faster, Battery: 9360 mAh lithium polymer battery, Screen: 10.1" touch screen, Storage: 4 GB*128 GB(can be extended up to 256 GB)
• Support 3 connection ways: WIFI/USB/BT, dual frequency 2.4/5GHz Wi-Fi communication; which makes the signal transmission more stable
• [Support EV Diagnostics]: Electric Vehicle HV System & Battery Pack Diagnostic,repair and maintain the battery packs. （optional add-on)
• X431 HDIII: enlarge diagnostic services to 24V heavy-duty trucks.
• X431 BST360: Monitor vehicle battery health status.
• Video Scope: Check the hard-to-reach parts (pump, engine, pipes, etc).
• X431-PROG3: For advanced key programming & module clone.
• ADAS mobile/PRO: Calibrate driver assistance systems.
• WiFi Printer: To print out diagnostic reports, live data, and other information without taking too much time.
• Scopebox: To quickly acquire circuit signals.
• Sensorbox: To simulate vehicle sensor faults.
• Multimeter: Allow you to measure the physical parameters such as voltage, resistance, frequency, etc.
• Heavy Duty Truck Software License: for gasoline cars and diesel heavy-duty trucks with Smarlink C
• NOTE: The expansion functional module must be used with the relevant equipment. (Need extra costs to buy these function modules)

Also stated by the supplier

• Launch X431 PAD V ELITE comes with New Smartlink C VCI For gasoline cars and diesel heavy-duty trucks, Support CAN FD, Online Programming + J2534 Reprogramming, Can Perform 60+ services functions,Bidirectional Control,ADAS calibration function, TPMS service, and 8 extended modules functions.
• Launch X431 PAD V Elite ALL-IN-ONE Comprehensive Professional Diagnostic Tool
• Support 2-Year Update.
• Launch X431 PAD V Elite is totally the same with the x431 pad Ⅶ Except for screen size and battery capacity,but ours x431 pad v is 700 Cheaper than them
• SMART BOX has replaced with Charging Dock Station and Intelligent Diagnostic Connector Smartlink C 3.5-inch screen Which Supports gasoline cars and diesel heavy-duty trucks
• Support 25 Languages: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkey, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Farsi, Romanian, Serbian, Finish, Swedish, Czech. ( Keep growing with UPDATES)No matter which country are you from, there have one suit for you.
• Higher pixel, x431 pad v's camera is 800*1300.
• More stronger material, x431 pad v has the IP65 case,more suitable for the working environment of the repair shop.
• Larger battery capacity, x431 pad v's battery is 9360 mAh,our battery is brand battery and the using time of the diagnosis are longer.
• The kickstand can be adjust of nearly 180 degrees, support three modes of hanging, support and normal, you can use it even drive
• X431 pad v launch scanner take new advanced practical features such as support more interfaces:USB type A/USB type C,Micro-SD, Micro-SIM slot (LTE version), etc
• X431 pad v's screen made of Gorilla Glass, which provides exceptional damage resistance to the scratches, bumps and drops from everyday use.
• QC3.0 (Quick Charge 3.0), the charging is not hot, the charging time is fast, the battery loss is reduced and the battery life will be extended.
• X431 pad v has the docking & charging station,which is very convenient to charge anytime, anywhere, you don't need to worry about power off when work on outdoor diagnosis.
• More fast CPU access, wider vehicle coverage and the storage 128GB can be extended to 256 gb, x431 pad v can reduce the memory usage, improve the running speed, and install more required software without worrying about insufficient memory.
• LAUNCH X431 PAD V Elite Main Fucntions
• [Support Autoauth for F.C.A SGW] ADAS Calibration, Full Bidirectional Control, Add Key, Topology Mapping/Graph, PIN Detection, Support PEV ( pure electric vehicle ),Gain Renault SGW diagnostic, Intelligent Diagnostics, Local Diagnostics, etc.
• [ADVANCED ECU ONLINE PROGRAMMING & J2534 PROGRAMMING ]: It can support reprogram/ rewrite/ code/ match new ECU after new module replacement. 1) program the new adaptive data to the on-board modules; 2) replace the existing software/firmware in the ECUs; 3) match the component control modules after repair or replacement; 4) flash the hidden functions and 5) enhance the vehicle performance. Dealership-level ECU Programming & Coding Functions: Backup/Recover ECU Data;Upgrade ECU, Manual & Automatic Options; Aftermarket Installation; Modification/Changeover
• [High-end Online Functions] automotive diagnostics scan tool provides powerful high-end online functions for 99% vehicles. 1) ECU Coding for replacing, match, relearn, recode new ECU modules; 2) ECU Online Coding for refreshing hidden function, forbid annoying features, customize OE-settings. 3) VAG Guided functions ease complex issues; 4) Personalization & ADAS improving car performance and driving safety.
• [Topology Map & ADeep Inspectionll System Diagnosis ]X431 PAD V scan tool new-added topology module mapping,it is easy to view the communication structure between modules.you can directly access all system to perform functions,view live data in graph.number of the DTCs are marked out for easy to location of the faults. And just one click, you can access to the fault module directly and the DTC definition and suggested reasons are listed, improving your working efficiency highest than ever.
• [Full Special Functions & Full Bi-Directional Control]LAUNCH X431 PAD V car diagnostic tool supports 50+ reset service,like key IMMO,abs bleeding,GEARBOX,Oil Reset,Injector coding, Gear Reset, SAS Reset, TPMS Reset, DPF Reset, BMS Reset, ETS Reset, AFS Reset, EGR Adaptation,etc.it also can perform bi-directional control on all systems,like ABS,fuel pumps,windows,doors,etc.✔️Get all functions under the diagnose menu.
• [Support almost automotive communication protocols CAN/CANFD/DoIP] and automotive communication standards J2534/D-PDU/RP1210.Support 200+ global brands,car makes coverage till 2024, Compatible with BMW, Benz, VW, Audi, GM, Ford, Chrysler, Toyota, Nissan, Honda, Land rover etc. Full system vehicle coverage for U.S., Asian and European markets over 200 Global brands, which is continually updated; ECU/ECM Online Programming & reprogramming for 30+ global car brands.
• Powerful Diagnostic Functions such as J2534 Programming/ECU Online Programming Support 30+ Brands, Easy Coding for 99% Car Brands, Refresh Hidden Functions, Accurate Test Data and Special Features, Support All Diagnostic Protocols
• Supports 85 HD Brands: you can turn your X431 scan tools into full function heavy duty truck diagnostic tools,working on both heavy-duty(Class 4 through 8) and medium-duty trucks(Such as heavy trucks, city buses, bulldozers, excavators, etc.).it works for 85 HD brands. ONLY NEED TO purchase the HD software,no need the HD module.
• Global Version for Customers outside the UK and EU countries
• UK/EU Version for UK/EU Countries customers

The HDIII module, BST360, video scope, X431-PROG3, ADAS, printer and scopebox are separate units.

Orders leave the warehouse within one business day. Delivery then takes 7 to 20 days. Orders over $150 ship free.

Not right for you? You have 30 days from delivery, with no restocking fee. See the full returns policy.