GODIAG Jaguar Land Rover Pre-2017 J-L-R Post-2017 KVM RFA 2-in-1 Communication Test Cable

A GODIAG two in one communication test cable for Jaguar Land Rover, covering both pre 2017 and post 2017 KVM and RFA modules. GODIAG is clear the cable cannot be used to read and write the KVM module for key work.

Specifications

• Note: This cable cannot be used to read and write KVM module for key programming purposes.

What you get

• 1pc x Jaguar Land Rover Pre-2017 J-L-R Post-2017 KVM RFA 2-in-1 Communication Test Cable
• GODIAG Jaguar Land Rover Pre-2017 J-L-R Post-2017 KVM RFA 2-in-1 Communication Test Cable
• For vehicles before 2017, key matching requires soldering wires to read and write to the KVM RFA module. For vehicles after 2017, key matching requires replacing the KVM RFA module's MCU. Careless operation during these two steps can easily cause the module to lose communication, so a communication test of the KVM RFA module is required before installation.
• The cable has two ends, one end for -2017 JLR KVM modules and the other end for 2018-2025 KVM modules. If you have done something to the KVM module, connect the KVM module with diagnostic tool to test the KVM communication status.
• The KVM RFA 2-in-1 Communication Test Cable is used to enable communication between diagnostic equipment and the KVM RFA module.
• Used in the office during key matching or for standalone communication after the module is removed from a vehicle.
• Can be used for connection testing during KVM RFA module repair.

That caveat matters. This is a communication test cable, not a KVM read and write harness.

Orders leave the warehouse within one business day. Delivery then takes 7 to 20 days. Orders over $150 ship free.

Not right for you? You have 30 days from delivery, with no restocking fee. See the full returns policy.