GODIAG GT112 K-Line for VW Skoda Seat 2nd & 3rd Generation Dashboard IMMO Key Matching Test Platform Cable

Older VAG dashboards talk over K-Line rather than CAN, and GT112 is the platform cable for that era. It sets up second and third generation VW, Skoda and Seat instrument clusters on the bench so immobiliser key matching can be practised and proven.

What you get

• 1pc x GODIAG GT112 K-Line FOR VW Skoda Seat 2nd & 3rd Generation Dashboard IMMO Key Matching Test Platform Cable
• How to Use IM608 with GT112 to Test VAG 2th3th IMMO Series Dashboard
• Godiag GT112 VW IMMO2 IMMO3 Test Platform Tutorials
• GODIAG GT112 K-Line for VW Skoda Seat 2nd & 3rd generation dashboard IMMO key matching test platform cable performs offline key and IMMO instrument synchronization test, intelligent IMMO system emergency start area sensing detection, IMMO dashboard offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching... It supports VW Skoda Seat and other models.
• GODIAG GT112 K-Line FOR VW Skoda Seat 2nd & 3rd Generation Dashboard IMMO Key Matching Test Platform Cable
• It can be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor, AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, Lonsdor, SUPER VAG, AUTEL, etc.
• Offline connection to the dashboard to convert to standard OBD2.
• Perform key chip and instrument synchronization test.
• Key induction adapter with light
• Press the vehicle's start switch and bring the device's key identifier close to a certain area. If the key identifier light flashes or lights up, it means that the area is the vehicle's key emergency start sensing area. If the customer's smart key is out of power, just put the dead smart key in the key emergency start sensing area to start the vehicle.
• Car IMMO Start and Start Key Chip Detection
• The light of the key identifier flashes and then goes out, indicating that the IMMO chip and the chip key are working properly.
• The light of the key identifier flashes for a long time, indicating that the chip key and the vehicle's IMMO system do not match, and the chip key needs to be re-matched.
• The light of the key identifier does not flash, which means that the vehicle's IMMO system is faulty. Please check the vehicle's IMMO system.

Match the cable to the generation you are working on: GT112 is K-Line, GT111 covers third and 3.5 generation CAN-Bus, GT110 is fourth generation CAN-Bus UDS, GT114 is Audi K-Line and GT115 is MQB IMMO4.

Orders leave the warehouse within one business day. Delivery then takes 7 to 20 days. Orders over $150 ship free.

Not right for you? You have 30 days from delivery, with no restocking fee. See the full returns policy.