GODIAG GT107 DSG Gearbox Adapter with GT105 II IMMO Prog AD Plus G-A ECU/TCU Cable Work with AUTEL IM508 IM608 Series For DQ250, DQ200 etc.

A GODIAG GT107 DSG gearbox adapter supplied with the GT105 II IMMO Prog AD Plus and the G-A ECU and TCU cable, working with the Autel IM508 and IM608 series on the DQ250, DQ200 and similar boxes. The three parts together are what make a DSG read possible from an Autel tool.

What you get

• 1pc x GODIAG GT105 II ECU IMMO Prog AD
• 1pc x DSG Adapter
• 1pc x Power Cord with Battery Clip
• 1pc x Probe
• GODIAG GT107 DSG gearbox connection adapter,DSG Gearbox maintenance engineers can clone, diagnose and repair DSG Gearbox ECU and can also read, write and adjust data for DSG Gearbox ECU via PCMFlash, PCMTuner, and Kessv2, etc.
• GODIAG GT105 II is the upgraded version Of GODIAG GT105,Newly added 5 new functions: vehicle voltage display, car remote control battery CR2032 battery test, car battery voltage alarm prompt(lower than 11V), TOYOTA steering angle matching, Lamborghini ID48 key IMMO auxiliary activation.
• GODIAG G-A ECU/TCU cable is used to connect AUTEL IM608 IM508 with GT107, GT107+ or GODIAG ECU GPT Boot adapter to read and write data on VAG gearbox ECU and engine ECU, clone ECU.
• GODIAG GT107 DSG Gearbox Adapter with GT105 II IMMO Prog AD
• GODIAG GT105 II is the upgraded version Of GODIAG GT105. Newly added 5 new functions: vehicle voltage display, car remote control battery CR2032 battery test, car battery voltage alarm prompt(lower than 11V), TOYOTA steering angle matching, Lamborghini ID48 key IMMO auxiliary activation
• GODIAG GT107 DSG Gearbox Adapter
• GODIAG GT107 This adapter has automatic and manual selection for PCMFlash software. For data reading and writing, you can choose "Auto", and for diagnosis you can choose "Manual". For other software kessv2, DQ200, DQ250, DQ500 you can also choose "Manual".
• Moreover, with the car battery power, the adapter can directly read and write DSG Gearbox data and you can clearly check the communication status during the data reading and writing process.
• GODIAG GT105 II ECU IMMO Prog AD
• A full-protocol ECU connection line for ECU programming power adjustment
• OBD2 independent PIN 4 body GND, PIN5 signal GND for special programming of some modules.
• PIN4 and PIN5 can be switched between short-circuit and non-short-circuit.
• Standard OBD2 independent PIN4, PIN5.
• Battery clip treated with environmentally-friendly salt spray, with a thickness of 0.5mm.
• The DC car battery cable adopts 0.75mm² 2-core sheathed cable, which supports DC5.5*2.5/ DC5.5*2.1 interface.
• The DC connector has a resettable 7A fuse.
• DC power interface, dedicated laboratory power connector.

Buying the set avoids discovering mid job that the cable or the break out box is the missing piece.

Orders leave the warehouse within one business day. Delivery then takes 7 to 20 days. Orders over $150 ship free.

Not right for you? You have 30 days from delivery, with no restocking fee. See the full returns policy.