VVDI2 BMW FEM & BDC Functions Authorization Service With Ikeycutter Condor

A VVDI2 BMW FEM and BDC functions authorisation service, priced for owners who hold both a VVDI2 with the BMW OBD function and an Ikeycutter Condor. Holding the Condor as well is what makes this the cheaper of the two routes.

Specifications

• Note: VVDI2 now add BMW FEM & BDC functions, VVDI2 Must have BMW OBD Function(SV86-3), then can open this function.

Also stated by the supplier

• If you have VVDI2 with BMW OBD Function, and Ikeycutter Condor, then can open this function
• VVDI2 BMW FEM & BDC Functions Authorization Service With Ikeycutter Condor
• 1.If you have VVDI2 with BMW OBD Function, and Ikeycutter Condor, then you can buy this authorization.
• 2.If you want other BMW FEM BDC Key Programmer, you can choose YH BMW FEM (SK226) on our site.
• VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)
• Users can refer to following information (3 steps for make keys: get key info->programming FEM/BDC system->make keys)
• 1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
• 2.support reset FEM/BDC KM(cluster require reset manually)
• 3.support erase key(after erase the key position become blank position)
• 4.support backup coding
• 5.support restore coding
• 1.backup coding and restore coding can direct operation generally.
• 2.add keys, reset KM, erase key must programming FEM/BDC system first
• 3.in FEM/BDC interface, if 'get key info' the type not support, it will show: customer should use "BMW E-sys software" program FEM/BDC system. then programming FEM/BDC system with VVDI2-BMW
• 4.when operation on 'programming FEM/BDC system'interface, please don't close this software window until all procedures completed.
• 5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
• 6.programming FEM/BDC system, must restore the original eeprom, restore coding. if cannot restore coding or after restore coding assemble FEM/BDC module back to car, but with problem(such as the remote control cannot start the car
• or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
• 7.if connect power to FEM/BDC module, but the relay keep ringing, please contact technical support for help. usually operation on FEM/BDC should be ok, just need to programming.

The VVDI2 must already have the BMW OBD function before this authorisation can be opened.

Orders leave the warehouse within one business day. Delivery then takes 7 to 20 days. Orders over $150 ship free.

Not right for you? You have 30 days from delivery, with no restocking fee. See the full returns policy.