Keyless2Go Replacement for Keyless Entry Car Key Vehicles That Use 6 Button 15913427 OUC60270 Remote, Self-Programming

The Best Self-Programmable Remote Car Key Replacement

An inexpensive replacement for your original remote key fob, the Keyless2Go car key replacement is self-programmable for vehicles up to 2010* and comes with easy do-it-yourself instructions to help you program your new car keyless entry on a wide variety of vehicles from Cadillac, Chevrolet, and GMC. Each fob key has been pre-tested to ensure functionality and that signals are transmitting properly. Every remote key fob comes complete with batteries and access to tech support to help get your new smart key working.

Compatible with:

2007-2014 Cadillac Escalade

2007-2014 Chevrolet Suburban

2007-2014 Chevrolet Tahoe

2007-2014 GMC Yukon

How to Program your Keyless2Go Key Fob Replacement (Up To 2010*):

Option 1 (for vehicles with the Driver Information Center)

1.Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)

2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.

3. Press the set/reset button (button will have a checkmark) until REMOTE KEY LEARNING ACTIVE is displayed. The vehicle is now in programming mode.

4. Press and hold LOCK and UNLOCK buttons at the same time on the first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALLremotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.

Option 2 (for vehicles without the Driver Information Center)

1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).

2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.

3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays.

4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal willbe heard indicating successful programming.

5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALLremotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.

Please note: vehicles 2011 and up require programming by a dealer or an automotive locksmith.

Orders leave the warehouse within one business day. Delivery then takes 7 to 14 days. Orders over $150 ship free.

Not right for you? You have 30 days from delivery, with no restocking fee. See the full returns policy.